China Power Transmission Solid Inline Shaft 18 22 28 32 40mm G3 Helical Gear Box with Precise Grinding bevel vs worm gearbox

Merchandise Description

 

Merchandise Description

Principal Characteristics:
one) Made of high good quality material,  non-rustingBoth flange and foot mounting obtainable and suitable for all-spherical installation
two) Large output torque and substantial radiating efficiency
3)Precise grinding helical equipment with Clean managing and minimal sounds, no deformation,can function prolonged time in dreadful condition
four)Nice look, resilient support existence and tiny quantity, compact framework
5)Each 2 and 3 phase offered with wide ratio range from 5 to two hundred
six)Diverse output shaft diameter obtainable -40-50mm
seven)Modular construction enlarge ratio from 5 to 1400

Major Supplies:
1)housing with aluminium alloyand solid iron material
two)Output Shaft Content:20CrMnTi
three)Great good quality no sound bearings to maintain lengthy provider life
4)Higher efficiency oil seal to avert from oil leakage

Purposes:
G3 Series helical gear motor are wide utilized for all kinds of automatic equipment, this sort of as chip removal equipment, conveyor, packaging equipment, woodworking equipment, farming tools, slurry scraper ,dryer, mixer and so on.

Detailed Photographs

Merchandise Parameters

 

(n1=1400r/min  50hz)
norminal ratio five ten 15 20 twenty five thirty forty fifty sixty eighty 100 one hundred 120 one hundred sixty   200   
0.1kw output shaft  Ø18 Ø22
n2* (r/min) 282 138 ninety two 70 fifty six forty six 35 28 23 eighteen 14 11 9 7
M2(Nm) 50hz three.two six.5 9.eight twelve.9 sixteen.1 19.six 25.7 31.1 37.5 forty nine.five sixty two.9 76.one a hundred.seven a hundred twenty five.4
60hz three 5 8 11 13 seventeen 21 26 31 forty one 52 63 eighty four 105
Fr1(N) 588 882 980 1180 1270 1370 1470 1570 2160 2450 2450 2450 2450 2450 2450
Fr2(N) 176
norminal ratio five 10 15 20 25 30 forty fifty sixty 80 100 100 120 160 two hundred
0.2kw output shaft  Ø18 Ø22 Ø28
n2* (r/min) 282 138 ninety two 70 56 forty five 35 29 23 eighteen fourteen thirteen twelve 8 seven
M2(Nm) 50hz six.5 12.6 19.one 26.3 32.six 38.9 fifty.four sixty three seventy five.six one hundred.8 103.nine 125.4 a hundred and fifty two hundred.4 250.seven
60hz five.four ten.5 16.six 21.9 27.1 32.four forty two 52.five 63 84 86.six 104.five one hundred twenty five 167 208.9
Fr1(N) 588 882 980 1180 1270 1760 1860 1960 2160 2450 2450 2840 3330 3430 3430
Fr2(N) 196
norminal ratio five ten fifteen 20 25 30 forty fifty sixty 80 100 100 a hundred and twenty one hundred sixty two hundred
0.4kw output shaft  Ø22 Ø28 Ø32
n2* (r/min) 288 one hundred forty four 92 72 58 forty seven 36 29 24 18 fourteen fourteen 12 nine seven
M2(Nm) 50hz 12.nine twenty five 38.6 fifty one.four 65.4 seventy eight.2 100.7 a hundred twenty five.4 a hundred and fifty two hundred.four 206.eight 250.seven 301.1 400.seven 461.8
60hz 10.seven 20.8 32.1 42.9 fifty four.five 65.2 eighty three.9 104.five one hundred twenty five 167 172.3 208.9 250.nine 333.nine 384.8
Fr1(N) 882 1180 1370 1470 1670 2550 2840 3140 3430 3430 3430 4900 5880 5880 5880
Fr2(N) 245
norminal ratio 5 ten 15 20 twenty five thirty 40 50 sixty eighty one hundred 100 one hundred twenty one hundred sixty 200
0.75kw output shaft  Ø28 Ø32 Ø40
n2* (r/min) 278 a hundred and forty 94 sixty nine fifty eight forty six 35 29 24 eighteen 14 14 11 nine seven
M2(Nm) 50hz 24.6 forty eight.two 72.nine ninety seven.5 122.one one hundred forty five.7 187.5 235.seven 282.nine 376.1 387.nine 439 527 703 764
60hz twenty.five forty.two sixty.seven eighty one.three 201.eight 121.four 156.three 196.four 235.seven 313.four 323.two 366 439 585 732
Fr1(N) 1270 1760 2160 2350 2450 4571 4210 4610 5490 5880 5880 7060 7060 7060 7060
Fr2(N) 294
norminal ratio 5 10 fifteen 20 twenty five thirty forty fifty sixty eighty one hundred one hundred 120 160 two hundred
1.5kw output shaft  Ø32 Ø40 Ø50
n2* (r/min) 280 a hundred and forty ninety three 70 55 47 34 27 24 seventeen 14 thirteen 12 eight 7
M2(Nm) 50hz 48.2 ninety seven.five 145.7 193.nine 242.1 272 351 439 527 703 724 878 1060 1230 1230
60hz forty.two 81.3 121.four 161.6 201.eight 226 293 366 439 585 603 732 878 1170 1230
Fr1(N) 1760 2450 2840 3230 3820 5100 5880 7060 7060 7060 7060 9800 9800 9800 9800
Fr2(N) 343
norminal ratio 5 10 15 twenty twenty five thirty forty 50 60 eighty 100        
2.2kw output shaft  Ø40 Ø50  
n2* (r/min) 272 136 95 sixty eight 54 45 36 28 24 18 14        
M2(Nm) 50hz 67 133 two hundred 266 332 399 515 644 773 1571 1230        
60hz 56 111 167 221 277 332 429 537 644 858 1080        
Fr1(N) 2160 3140 3530 4571 4700 6960 7250 8620 9800 9800 9800        
Fr2(N) 392

Outline and mounting dimension:

G3FM: 3 Phase Gear MOTOR WITH FLANGE                                                                                       (n1=1400r/min)
Power kw output shaft ratio A F I J M O O1 P Q R S T U W X Y Y1
common brake
0.1kw  Ø18 5–thirty-40-50 236 270 192.five 11 16.five 170 four 10 thirty a hundred forty five 35 eighteen twenty.five 129 six 157 80 81
 Ø22 -one hundred sixty-200 262 296 197.five eleven 19 185 four twelve 40 148 47 22 24.five 129 6 171.5 89.five eighty three.five
0.2kw  Ø18 five- 267 270 192.5 11 sixteen.5 one hundred seventy 4 10 thirty 145 35 18 twenty.5 129 six 161 80 eighty one
 Ø22 -eighty-a hundred 293 296 197.5 eleven 19 185 4 twelve 40 148 forty seven 22 24.5 129 6 171.five 89.five 83.five
 Ø28 306 309.five 208.5 eleven 23.five 215 4 15 forty five one hundred seventy fifty 28 31 129 8 198.5 one hundred and five.5 88
0.4kw  Ø22 5- 314 324.5 204 eleven 19 185 four twelve 40 148 47 22 24.five 139 six 171.five 89.five 88.five
 Ø28 -80-a hundred 330 337.5 215 11 23.5 215 4 15 45 one hundred seventy fifty 28 31 139 eight 198.five a hundred and five.5 ninety three
 Ø32 349 357 229.five thirteen 28.five 250 four fifteen 55 180 60 32 35 139 10 234 126 ninety eight
0.75kw  Ø28 five- 350.5 343.5 227.5 eleven 23.5 215 4 fifteen forty five 170 50 28 31 159 eight 198.five one hundred and five.5 103
 Ø32 -eighty-a hundred 379.5 387 242 13 28.five 250 four 15 fifty five a hundred and eighty 60 32 35 159 10 234 126 108
 Ø40 401.5 408.five 270 eighteen 34 310 5 18 65 230 seventy one 40 43 185 twelve 284 149 126.5
1.5kw  Ø32 5- 420.five 441 254 13 28.5 250 5 15 fifty five one hundred eighty 60 32 35 185 10 234 126 121
 Ø40 -eighty-a hundred 457.5 478 270 18 34 310 five eighteen sixty five 230 seventy one 40 forty three 185 12 284 149 126.5
 Ø50 485.5 506 three hundred 22 40 360 five twenty five 75 270 eighty three fifty fifty three.5 185 14 325 173.5 132.5
2.2kw  Ø40 5- 466.5 487 270 eighteen 34 310 5 18 65 230 71 40 43 185 12 284 149 126.five
 Ø50 -eighty-a hundred 510.five 531 three hundred 22 forty 360 5 25 75 270 83 fifty 53.five 185 fourteen 325 173.five 132.five


 

G3LM: 3 Period Gear MOTOR WITH FOOT                                                                                                               (n1=1400r/min)
Power kw output shaft ratio A D E F J G H K P S T   U  V W   X  Y   Y1       
standard brake
0.1kw  Ø18 5–30-40-50 236 270 forty a hundred and ten 135 16.5 65 nine forty five thirty 18 20.five 129 183 6 133 85 ten
 Ø22 -one hundred sixty-two hundred 262 296 65 a hundred thirty 155 19 ninety 11 55 forty 22 24.five 129 193 6 139.five 90 twelve
0.2kw  Ø18 five- 267 270 forty a hundred and ten 135 16.5 65 9 forty five 30 eighteen twenty.5 129 183 6 133 85 10
 Ø22 -80-a hundred 293 296 65 a hundred thirty 155 19 90 11 55 forty 22 24.five 129 193 six 139.5 90 12
 Ø28 306 309.five 90 one hundred forty one hundred seventy five 23.5 one hundred twenty five 11 sixty five 45 28 31 129 203 eight one hundred seventy 110 fifteen
0.4kw  Ø22 5- 314 324.5 65 a hundred thirty 155 19 90 eleven 55 forty 22 24.five 139 199.5 six 141.5 ninety 12
 Ø28 -eighty-one hundred 330 337.5 ninety one hundred forty 175 23.five a hundred twenty five 11 65 45 28 31 139 210 8 one hundred seventy 110 15
 Ø32 349 357 a hundred thirty one hundred seventy 208 28.five 170 thirteen 70 fifty five 32 35 139 226 ten 198 a hundred thirty 18
0.75kw  Ø28 5- 350.five 343.5 ninety a hundred and forty one hundred seventy five 23.five one hundred twenty five eleven sixty five 45 28 31 159 222 eight one hundred seventy one hundred ten 15
 Ø32 -eighty-one hundred 379.5 387 a hundred thirty 170 208 28.five 170 13 70 55 32 35 159 238.5 10 198 one hundred thirty eighteen
 Ø40 401.five 408.five a hundred and fifty 210 254 34 196 fifteen 90 sixty five 40 forty three 185 249 12 230 one hundred fifty twenty
1.5kw  Ø32 five- 420.five 441 a hundred thirty a hundred and seventy 208 28.5 one hundred seventy 13 70 fifty five 32 35 185 250.5 10 198 a hundred thirty eighteen
 Ø40 -80-one hundred 457.five 478 a hundred and fifty 210 254 34 196 15 ninety sixty five forty 43 185 260 12 230 a hundred and fifty twenty
 Ø50 485.five 506 160 230 290 40 210 eighteen 100 seventy five fifty 53.five 185 288 14 265 a hundred and seventy twenty five
2.2kw  Ø40 five- 466.five 487 one hundred fifty 210 254 34 196 fifteen ninety sixty five 40 43 185 260 twelve 230 a hundred and fifty twenty
 Ø50 -80-one hundred 510.5 531 one hundred sixty 230 290 forty 210 18 one hundred 75 fifty fifty three.five 185 288 14 265 170 twenty five


 

G3FS: IEC Gear REDUCER WITH FOOT                                                                                                                           (n1=1400r/min)
Power kw output shaft ratio A B C F I J L M N O O1 P Q R S S1 T T1 W W1 X Y Y1
0.12kw  Ø18 five–thirty-forty-fifty 147 ninety five one hundred fifteen 154 eleven 16.5 4.five a hundred and seventy 140 four 10 30 a hundred forty five 35 18 11 20.5 12.8 six four 163 eighty 86.five
 Ø22 -one hundred sixty-200 173 95 a hundred and fifteen 164 eleven 19 4.5 185 one hundred forty 4 twelve forty 148 forty seven 22 11 24.5 twelve.8 6 4 171.5 89.5 89
0.18kw  Ø18 five- 147 95 115 154 eleven 16.five 4.five 170 a hundred and forty four ten 30 one hundred forty five 35 eighteen 11 20.5 12.8 six four 163 80 86.5
 Ø22 -80-one hundred 173 95 115 164 11 19 4.5 185 a hundred and forty 4 12 40 148 forty seven 22 eleven 24.5 12.8 six four 171.five 89.5 89
 Ø28 186.5 ninety five one hundred fifteen 186 11 23.five 4.5 215 one hundred forty four 15 45 a hundred and seventy 50 28 eleven 31 twelve.eight 8 four 198.five 105.5 ninety three.five
0.37kw  Ø22 five- 181.five one hundred ten 130 164 11 19 four.five 185 one hundred sixty 4 12 forty 148 47 22 fourteen 24.five sixteen.three 6 five 201 89.5 ninety nine
 Ø28 -80-one hundred 198 a hundred and ten one hundred thirty 186 eleven 23.5 4.five 215 one hundred sixty four 15 forty five one hundred seventy fifty 28 14 31 16.3 eight five 198.5 105.5 103.five
 Ø32 216.five one hundred ten 130 215 13 28.five four.five 250 160 four fifteen fifty five 180 sixty 32 14 35 sixteen.3 10 5 234 126 108.five
0.75kw  Ø28 five- 206.five 130 a hundred sixty five 185 eleven 23.5 4.5 215 two hundred 4 15 45 one hundred seventy 50 28 19 31 21.8 eight 6 216.five one hundred and five.five 123.5
 Ø32 -80-100 235 one hundred thirty 165 215 thirteen 28.five four.5 250 two hundred four 15 55 a hundred and eighty sixty 32 19 35 21.eight ten 6 236.5 126 128.5
 Ø40 260.5 a hundred thirty one hundred sixty five 270 18 34 4.5 310 200 5 18 sixty five 230 seventy one 40 19 43 21.8 twelve 8 284 149 134
1.5kw  Ø32 5- 252 one hundred thirty one hundred sixty five 215 thirteen 28.five four.5 250 two hundred 5 15 55 a hundred and eighty 60 32 24 35 27.3 10 8 236.five 126 128.5
 Ø40 -eighty-100 293.5 one hundred thirty 165 270 eighteen 34 4.five 310 two hundred five eighteen sixty five 230 71 40 24 43 27.three twelve 8 284 149 134
 Ø50 321.5 a hundred thirty a hundred sixty five 300 22 40 four.five 360 200 five 25 seventy five 270 eighty three 50 24 fifty three.5 27.3 fourteen eight 323.five 173.5 one hundred forty
2.2kw  Ø40 5- 290 180 215 270 18 34 five.five 310 250 five 18 65 230 71 40 28 43 31.three 12 8 284 149 134
 Ø50 -eighty-a hundred 334 180 215 three hundred 22 forty five.5 360 250 5 25 seventy five 270 eighty three fifty 28 fifty three.five 31.three 14 8 323.5 173.5 140


 

G3LS: IEC Gear REDUCER WITH FOOT                                                                                                                           (n1=1400r/min)  
Power kw output shaft ratio A B C D E F G H J K L N P S S1 T T1 W W1 X Y Y1 Z
0.12kw  Ø18 five–30-40-50 147 95 one hundred fifteen 40 one hundred ten 135 65 nine sixteen.five 45 4.5 one hundred forty thirty 18 eleven 20.5 12.8 6 4 138.5 85 ten M8
 Ø22 -a hundred and sixty-200 173 95 a hundred and fifteen 65 a hundred thirty 154 ninety eleven 19 55 4.5 one hundred forty forty 22 eleven 24.5 12.8 six four 141 ninety twelve M8
0.18kw  Ø18 five- 147 ninety five 115 forty one hundred ten a hundred thirty five 65 9 16.five forty five four.5 one hundred forty thirty 18 eleven 20.five 12.8 6 4 138.5 eighty five 10 M8
 Ø22 -80-a hundred 173 95 115 sixty five 130 154 ninety 11 19 fifty five four.five 140 forty 22 eleven 24.5 12.eight 6 4 141 ninety 12 M8
 Ø28 186.5 95 one hundred fifteen ninety 140 a hundred seventy five 125 eleven 23.5 65 four.five 140 45 28 11 31 twelve.eight 8 four 170 110 fifteen M8
0.37kw  Ø22 5- 181.five a hundred and ten one hundred thirty 65 130 154 90 eleven 19 fifty five 4.five 160 40 22 14 24.five 16.three 6 5 151 90 twelve M8
 Ø28 -eighty-100 198 one hundred ten 130 ninety one hundred forty 175 one hundred twenty five eleven 23.five sixty five four.five a hundred and sixty 45 28 fourteen 31 sixteen.three eight 5 one hundred seventy 110 fifteen M8
 Ø32 216.5 a hundred and ten 130 one hundred thirty 170 208 one hundred seventy thirteen 28.5 70 four.5 a hundred and sixty 55 32 14 35 16.three ten five 198 one hundred thirty eighteen M8
0.75kw  Ø28 5- 206.5 a hundred thirty one hundred sixty five 90 one hundred forty 175 a hundred twenty five eleven 23.five sixty five 4.five two hundred forty five 28 19 31 21.eight 8 six 186.5 one hundred ten 15 M10
 Ø32 -eighty-100 235 a hundred thirty 165 a hundred thirty one hundred seventy 208 one hundred seventy 13 28.5 70 4.five two hundred fifty five 32 19 35 21.8 ten six 201.5 a hundred thirty eighteen M10
 Ø40 260.five 130 one hundred sixty five a hundred and fifty 210 254 196 fifteen 34 90 four.5 200 65 40 19 43 21.eight 12 eight 230 150 twenty M10
1.5kw  Ø32 5- 252 a hundred thirty one hundred sixty five a hundred thirty 170 208 a hundred and seventy 13 28.5 70 four.5 two hundred fifty five 32 24 35 27.3 ten eight 201.five a hundred thirty 18 M10
 Ø40 -80-one hundred 293.5 one hundred thirty one hundred sixty five one hundred fifty 210 254 196 15 34 90 4.5 200 sixty five forty 24 43 27.3 twelve 8 230 one hundred fifty twenty M10
 Ø50 321.five 130 one hundred sixty five a hundred and sixty 230 290 210 eighteen 40 a hundred four.5 two hundred seventy five fifty 24 fifty three.five 27.three 14 eight 265 170 25 M10
2.2kw  Ø40 5- 290 one hundred eighty 215 150 210 254 196 15 34 90 5.five 250 65 40 28 43 31.three 12 8 230 150 twenty M12
 Ø50 -eighty-100 334 180 215 160 230 290 210 eighteen forty one hundred 5.five 250 seventy five fifty 28 53.five 31.three 14 eight 265 one hundred seventy 25 M12

Company Profile

We are a professional reducer company located in HangZhou, ZHangZhoug province.Our top goods is  full selection of RV571-one hundred fifty worm reducers , also supplied GKM hypoid helical gearbox, GRC inline helical gearbox, Personal computer units, UDL Variators and AC Motors, G3 helical equipment motor.Goods are broadly used for purposes such as: foodstuffs, ceramics, packing, substances, pharmacy, plastics, paper-producing, design equipment, metallurgic mine, environmental protection engineering, and all types of automatic traces, and assembly lines.With quick supply, superior soon after-revenue support, superior making facility, our goods market well  both at home and overseas. We have exported our reducers to Southeast Asia, Eastern Europe and the Middle East and so on.Our intention is to produce and innovate on the basis of substantial top quality, and generate a good status for reducers.

Workshop:

 

Exhibition

ZheJiang PTC Fair:

Packaging & Delivery

After Income Provider

1.Maintenance Time and Guarantee:In 1 year right after acquiring items.
2.Other SupportIncluding modeling assortment manual, installation guide, and dilemma resolution guidebook, etc

FAQ

one.Q:Can you make as per customer drawing?
A: Of course, we offer customized provider for consumers accordingly. We can use customer’s nameplate for gearboxes.
two.Q:What is your phrases of payment ?
A: thirty% deposit just before creation,equilibrium T/T ahead of delivery.
3.Q:Are you a trading organization or producer?
A:We are a manufacurer with sophisticated tools and seasoned staff.
4.Q:What is your production capacity?
A:4000-5000 PCS/Thirty day period
5.Q:Totally free sample is offered or not?
A:Yes, we can provide free of charge sample if consumer agree to pay for the courier cost
six.Q:Do you have any certificate?
A:Of course, we have CE certification and SGS certificate report.

Make contact with details:
Ms Lingel Pan
For any questions just really feel free of charge ton get in touch with me. A lot of many thanks for your sort interest to our organization!

US $35-145
/ Piece
|
1 Piece

(Min. Order)

###

Application: Motor, Machinery, Marine, Agricultural Machinery, Power Transmission Applications
Function: Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction
Layout: Coaxial
Hardness: Hardened Tooth Surface
Installation: Vertical or Horizontal Type
Step: Two Stage- Three Stage

###

Samples:
US$ 35/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

(n1=1400r/min  50hz)
norminal ratio 5 10 15 20 25 30 40 50 60 80 100 100 120 160   200   
0.1kw output shaft  Ø18 Ø22
n2* (r/min) 282 138 92 70 56 46 35 28 23 18 14 11 9 7
M2(Nm) 50hz 3.2 6.5 9.8 12.9 16.1 19.6 25.7 31.1 37.5 49.5 62.9 76.1 100.7 125.4
60hz 3 5 8 11 13 17 21 26 31 41 52 63 84 105
Fr1(N) 588 882 980 1180 1270 1370 1470 1570 2160 2450 2450 2450 2450 2450 2450
Fr2(N) 176
norminal ratio 5 10 15 20 25 30 40 50 60 80 100 100 120 160 200
0.2kw output shaft  Ø18 Ø22 Ø28
n2* (r/min) 282 138 92 70 56 45 35 29 23 18 14 13 12 8 7
M2(Nm) 50hz 6.5 12.6 19.1 26.3 32.6 38.9 50.4 63 75.6 100.8 103.9 125.4 150 200.4 250.7
60hz 5.4 10.5 16.6 21.9 27.1 32.4 42 52.5 63 84 86.6 104.5 125 167 208.9
Fr1(N) 588 882 980 1180 1270 1760 1860 1960 2160 2450 2450 2840 3330 3430 3430
Fr2(N) 196
norminal ratio 5 10 15 20 25 30 40 50 60 80 100 100 120 160 200
0.4kw output shaft  Ø22 Ø28 Ø32
n2* (r/min) 288 144 92 72 58 47 36 29 24 18 14 14 12 9 7
M2(Nm) 50hz 12.9 25 38.6 51.4 65.4 78.2 100.7 125.4 150 200.4 206.8 250.7 301.1 400.7 461.8
60hz 10.7 20.8 32.1 42.9 54.5 65.2 83.9 104.5 125 167 172.3 208.9 250.9 333.9 384.8
Fr1(N) 882 1180 1370 1470 1670 2550 2840 3140 3430 3430 3430 4900 5880 5880 5880
Fr2(N) 245
norminal ratio 5 10 15 20 25 30 40 50 60 80 100 100 120 160 200
0.75kw output shaft  Ø28 Ø32 Ø40
n2* (r/min) 278 140 94 69 58 46 35 29 24 18 14 14 11 9 7
M2(Nm) 50hz 24.6 48.2 72.9 97.5 122.1 145.7 187.5 235.7 282.9 376.1 387.9 439 527 703 764
60hz 20.5 40.2 60.7 81.3 201.8 121.4 156.3 196.4 235.7 313.4 323.2 366 439 585 732
Fr1(N) 1270 1760 2160 2350 2450 4020 4210 4610 5490 5880 5880 7060 7060 7060 7060
Fr2(N) 294
norminal ratio 5 10 15 20 25 30 40 50 60 80 100 100 120 160 200
1.5kw output shaft  Ø32 Ø40 Ø50
n2* (r/min) 280 140 93 70 55 47 34 27 24 17 14 13 12 8 7
M2(Nm) 50hz 48.2 97.5 145.7 193.9 242.1 272 351 439 527 703 724 878 1060 1230 1230
60hz 40.2 81.3 121.4 161.6 201.8 226 293 366 439 585 603 732 878 1170 1230
Fr1(N) 1760 2450 2840 3230 3820 5100 5880 7060 7060 7060 7060 9800 9800 9800 9800
Fr2(N) 343
norminal ratio 5 10 15 20 25 30 40 50 60 80 100        
2.2kw output shaft  Ø40 Ø50  
n2* (r/min) 272 136 95 68 54 45 36 28 24 18 14        
M2(Nm) 50hz 67 133 200 266 332 399 515 644 773 1029 1230        
60hz 56 111 167 221 277 332 429 537 644 858 1080        
Fr1(N) 2160 3140 3530 4020 4700 6960 7250 8620 9800 9800 9800        
Fr2(N) 392

###

G3FM: THREE PHASE GEAR MOTOR WITH FLANGE                                                                                       (n1=1400r/min)
Power kw output shaft ratio A F I J M O O1 P Q R S T U W X Y Y1
standard brake
0.1kw  Ø18 5-10-15-20-25-30-40-50 236 270 192.5 11 16.5 170 4 10 30 145 35 18 20.5 129 6 157 80 81
 Ø22 60-80-100-120-160-200 262 296 197.5 11 19 185 4 12 40 148 47 22 24.5 129 6 171.5 89.5 83.5
0.2kw  Ø18 5-10-15-20-25 267 270 192.5 11 16.5 170 4 10 30 145 35 18 20.5 129 6 161 80 81
 Ø22 30-40-50-60-80-100 293 296 197.5 11 19 185 4 12 40 148 47 22 24.5 129 6 171.5 89.5 83.5
 Ø28 100-120-160-200 306 309.5 208.5 11 23.5 215 4 15 45 170 50 28 31 129 8 198.5 105.5 88
0.4kw  Ø22 5-10-15-20-25 314 324.5 204 11 19 185 4 12 40 148 47 22 24.5 139 6 171.5 89.5 88.5
 Ø28 30-40-50-60-80-100 330 337.5 215 11 23.5 215 4 15 45 170 50 28 31 139 8 198.5 105.5 93
 Ø32 100-120-160-200 349 357 229.5 13 28.5 250 4 15 55 180 60 32 35 139 10 234 126 98
0.75kw  Ø28 5-10-15-20-25 350.5 343.5 227.5 11 23.5 215 4 15 45 170 50 28 31 159 8 198.5 105.5 103
 Ø32 30-40-50-60-80-100 379.5 387 242 13 28.5 250 4 15 55 180 60 32 35 159 10 234 126 108
 Ø40 100-120-160-200 401.5 408.5 270 18 34 310 5 18 65 230 71 40 43 185 12 284 149 126.5
1.5kw  Ø32 5-10-15-20-25 420.5 441 254 13 28.5 250 5 15 55 180 60 32 35 185 10 234 126 121
 Ø40 30-40-50-60-80-100 457.5 478 270 18 34 310 5 18 65 230 71 40 43 185 12 284 149 126.5
 Ø50 100-120-160-200 485.5 506 300 22 40 360 5 25 75 270 83 50 53.5 185 14 325 173.5 132.5
2.2kw  Ø40 5-10-15-20-25 466.5 487 270 18 34 310 5 18 65 230 71 40 43 185 12 284 149 126.5
 Ø50 30-40-50-60-80-100 510.5 531 300 22 40 360 5 25 75 270 83 50 53.5 185 14 325 173.5 132.5

###

G3LM: THREE PHASE GEAR MOTOR WITH FOOT                                                                                                               (n1=1400r/min)
Power kw output shaft ratio A D E F J G H K P S T   U  V W   X  Y   Y1       
standard brake
0.1kw  Ø18 5-10-15-20-25-30-40-50 236 270 40 110 135 16.5 65 9 45 30 18 20.5 129 183 6 133 85 10
 Ø22 60-80-100-120-160-200 262 296 65 130 155 19 90 11 55 40 22 24.5 129 193 6 139.5 90 12
0.2kw  Ø18 5-10-15-20-25 267 270 40 110 135 16.5 65 9 45 30 18 20.5 129 183 6 133 85 10
 Ø22 30-40-50-60-80-100 293 296 65 130 155 19 90 11 55 40 22 24.5 129 193 6 139.5 90 12
 Ø28 100-120-160-200 306 309.5 90 140 175 23.5 125 11 65 45 28 31 129 203 8 170 110 15
0.4kw  Ø22 5-10-15-20-25 314 324.5 65 130 155 19 90 11 55 40 22 24.5 139 199.5 6 141.5 90 12
 Ø28 30-40-50-60-80-100 330 337.5 90 140 175 23.5 125 11 65 45 28 31 139 210 8 170 110 15
 Ø32 100-120-160-200 349 357 130 170 208 28.5 170 13 70 55 32 35 139 226 10 198 130 18
0.75kw  Ø28 5-10-15-20-25 350.5 343.5 90 140 175 23.5 125 11 65 45 28 31 159 222 8 170 110 15
 Ø32 30-40-50-60-80-100 379.5 387 130 170 208 28.5 170 13 70 55 32 35 159 238.5 10 198 130 18
 Ø40 100-120-160-200 401.5 408.5 150 210 254 34 196 15 90 65 40 43 185 249 12 230 150 20
1.5kw  Ø32 5-10-15-20-25 420.5 441 130 170 208 28.5 170 13 70 55 32 35 185 250.5 10 198 130 18
 Ø40 30-40-50-60-80-100 457.5 478 150 210 254 34 196 15 90 65 40 43 185 260 12 230 150 20
 Ø50 100-120-160-200 485.5 506 160 230 290 40 210 18 100 75 50 53.5 185 288 14 265 170 25
2.2kw  Ø40 5-10-15-20-25 466.5 487 150 210 254 34 196 15 90 65 40 43 185 260 12 230 150 20
 Ø50 30-40-50-60-80-100 510.5 531 160 230 290 40 210 18 100 75 50 53.5 185 288 14 265 170 25

###

G3FS: IEC GEAR REDUCER WITH FOOT                                                                                                                           (n1=1400r/min)
Power kw output shaft ratio A B C F I J L M N O O1 P Q R S S1 T T1 W W1 X Y Y1
0.12kw  Ø18 5-10-15-20-25-30-40-50 147 95 115 154 11 16.5 4.5 170 140 4 10 30 145 35 18 11 20.5 12.8 6 4 163 80 86.5
 Ø22 60-80-100-120-160-200 173 95 115 164 11 19 4.5 185 140 4 12 40 148 47 22 11 24.5 12.8 6 4 171.5 89.5 89
0.18kw  Ø18 5-10-15-20-25 147 95 115 154 11 16.5 4.5 170 140 4 10 30 145 35 18 11 20.5 12.8 6 4 163 80 86.5
 Ø22 30-40-50-60-80-100 173 95 115 164 11 19 4.5 185 140 4 12 40 148 47 22 11 24.5 12.8 6 4 171.5 89.5 89
 Ø28 100-120-160-200 186.5 95 115 186 11 23.5 4.5 215 140 4 15 45 170 50 28 11 31 12.8 8 4 198.5 105.5 93.5
0.37kw  Ø22 5-10-15-20-25 181.5 110 130 164 11 19 4.5 185 160 4 12 40 148 47 22 14 24.5 16.3 6 5 201 89.5 99
 Ø28 30-40-50-60-80-100 198 110 130 186 11 23.5 4.5 215 160 4 15 45 170 50 28 14 31 16.3 8 5 198.5 105.5 103.5
 Ø32 100-120-160-200 216.5 110 130 215 13 28.5 4.5 250 160 4 15 55 180 60 32 14 35 16.3 10 5 234 126 108.5
0.75kw  Ø28 5-10-15-20-25 206.5 130 165 185 11 23.5 4.5 215 200 4 15 45 170 50 28 19 31 21.8 8 6 216.5 105.5 123.5
 Ø32 30-40-50-60-80-100 235 130 165 215 13 28.5 4.5 250 200 4 15 55 180 60 32 19 35 21.8 10 6 236.5 126 128.5
 Ø40 100-120-160-200 260.5 130 165 270 18 34 4.5 310 200 5 18 65 230 71 40 19 43 21.8 12 8 284 149 134
1.5kw  Ø32 5-10-15-20-25 252 130 165 215 13 28.5 4.5 250 200 5 15 55 180 60 32 24 35 27.3 10 8 236.5 126 128.5
 Ø40 30-40-50-60-80-100 293.5 130 165 270 18 34 4.5 310 200 5 18 65 230 71 40 24 43 27.3 12 8 284 149 134
 Ø50 100-120-160-200 321.5 130 165 300 22 40 4.5 360 200 5 25 75 270 83 50 24 53.5 27.3 14 8 323.5 173.5 140
2.2kw  Ø40 5-10-15-20-25 290 180 215 270 18 34 5.5 310 250 5 18 65 230 71 40 28 43 31.3 12 8 284 149 134
 Ø50 30-40-50-60-80-100 334 180 215 300 22 40 5.5 360 250 5 25 75 270 83 50 28 53.5 31.3 14 8 323.5 173.5 140

###

G3LS: IEC GEAR REDUCER WITH FOOT                                                                                                                           (n1=1400r/min)  
Power kw output shaft ratio A B C D E F G H J K L N P S S1 T T1 W W1 X Y Y1 Z
0.12kw  Ø18 5-10-15-20-25-30-40-50 147 95 115 40 110 135 65 9 16.5 45 4.5 140 30 18 11 20.5 12.8 6 4 138.5 85 10 M8
 Ø22 60-80-100-120-160-200 173 95 115 65 130 154 90 11 19 55 4.5 140 40 22 11 24.5 12.8 6 4 141 90 12 M8
0.18kw  Ø18 5-10-15-20-25 147 95 115 40 110 135 65 9 16.5 45 4.5 140 30 18 11 20.5 12.8 6 4 138.5 85 10 M8
 Ø22 30-40-50-60-80-100 173 95 115 65 130 154 90 11 19 55 4.5 140 40 22 11 24.5 12.8 6 4 141 90 12 M8
 Ø28 100-120-160-200 186.5 95 115 90 140 175 125 11 23.5 65 4.5 140 45 28 11 31 12.8 8 4 170 110 15 M8
0.37kw  Ø22 5-10-15-20-25 181.5 110 130 65 130 154 90 11 19 55 4.5 160 40 22 14 24.5 16.3 6 5 151 90 12 M8
 Ø28 30-40-50-60-80-100 198 110 130 90 140 175 125 11 23.5 65 4.5 160 45 28 14 31 16.3 8 5 170 110 15 M8
 Ø32 100-120-160-200 216.5 110 130 130 170 208 170 13 28.5 70 4.5 160 55 32 14 35 16.3 10 5 198 130 18 M8
0.75kw  Ø28 5-10-15-20-25 206.5 130 165 90 140 175 125 11 23.5 65 4.5 200 45 28 19 31 21.8 8 6 186.5 110 15 M10
 Ø32 30-40-50-60-80-100 235 130 165 130 170 208 170 13 28.5 70 4.5 200 55 32 19 35 21.8 10 6 201.5 130 18 M10
 Ø40 100-120-160-200 260.5 130 165 150 210 254 196 15 34 90 4.5 200 65 40 19 43 21.8 12 8 230 150 20 M10
1.5kw  Ø32 5-10-15-20-25 252 130 165 130 170 208 170 13 28.5 70 4.5 200 55 32 24 35 27.3 10 8 201.5 130 18 M10
 Ø40 30-40-50-60-80-100 293.5 130 165 150 210 254 196 15 34 90 4.5 200 65 40 24 43 27.3 12 8 230 150 20 M10
 Ø50 100-120-160-200 321.5 130 165 160 230 290 210 18 40 100 4.5 200 75 50 24 53.5 27.3 14 8 265 170 25 M10
2.2kw  Ø40 5-10-15-20-25 290 180 215 150 210 254 196 15 34 90 5.5 250 65 40 28 43 31.3 12 8 230 150 20 M12
 Ø50 30-40-50-60-80-100 334 180 215 160 230 290 210 18 40 100 5.5 250 75 50 28 53.5 31.3 14 8 265 170 25 M12
US $35-145
/ Piece
|
1 Piece

(Min. Order)

###

Application: Motor, Machinery, Marine, Agricultural Machinery, Power Transmission Applications
Function: Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction
Layout: Coaxial
Hardness: Hardened Tooth Surface
Installation: Vertical or Horizontal Type
Step: Two Stage- Three Stage

###

Samples:
US$ 35/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

(n1=1400r/min  50hz)
norminal ratio 5 10 15 20 25 30 40 50 60 80 100 100 120 160   200   
0.1kw output shaft  Ø18 Ø22
n2* (r/min) 282 138 92 70 56 46 35 28 23 18 14 11 9 7
M2(Nm) 50hz 3.2 6.5 9.8 12.9 16.1 19.6 25.7 31.1 37.5 49.5 62.9 76.1 100.7 125.4
60hz 3 5 8 11 13 17 21 26 31 41 52 63 84 105
Fr1(N) 588 882 980 1180 1270 1370 1470 1570 2160 2450 2450 2450 2450 2450 2450
Fr2(N) 176
norminal ratio 5 10 15 20 25 30 40 50 60 80 100 100 120 160 200
0.2kw output shaft  Ø18 Ø22 Ø28
n2* (r/min) 282 138 92 70 56 45 35 29 23 18 14 13 12 8 7
M2(Nm) 50hz 6.5 12.6 19.1 26.3 32.6 38.9 50.4 63 75.6 100.8 103.9 125.4 150 200.4 250.7
60hz 5.4 10.5 16.6 21.9 27.1 32.4 42 52.5 63 84 86.6 104.5 125 167 208.9
Fr1(N) 588 882 980 1180 1270 1760 1860 1960 2160 2450 2450 2840 3330 3430 3430
Fr2(N) 196
norminal ratio 5 10 15 20 25 30 40 50 60 80 100 100 120 160 200
0.4kw output shaft  Ø22 Ø28 Ø32
n2* (r/min) 288 144 92 72 58 47 36 29 24 18 14 14 12 9 7
M2(Nm) 50hz 12.9 25 38.6 51.4 65.4 78.2 100.7 125.4 150 200.4 206.8 250.7 301.1 400.7 461.8
60hz 10.7 20.8 32.1 42.9 54.5 65.2 83.9 104.5 125 167 172.3 208.9 250.9 333.9 384.8
Fr1(N) 882 1180 1370 1470 1670 2550 2840 3140 3430 3430 3430 4900 5880 5880 5880
Fr2(N) 245
norminal ratio 5 10 15 20 25 30 40 50 60 80 100 100 120 160 200
0.75kw output shaft  Ø28 Ø32 Ø40
n2* (r/min) 278 140 94 69 58 46 35 29 24 18 14 14 11 9 7
M2(Nm) 50hz 24.6 48.2 72.9 97.5 122.1 145.7 187.5 235.7 282.9 376.1 387.9 439 527 703 764
60hz 20.5 40.2 60.7 81.3 201.8 121.4 156.3 196.4 235.7 313.4 323.2 366 439 585 732
Fr1(N) 1270 1760 2160 2350 2450 4020 4210 4610 5490 5880 5880 7060 7060 7060 7060
Fr2(N) 294
norminal ratio 5 10 15 20 25 30 40 50 60 80 100 100 120 160 200
1.5kw output shaft  Ø32 Ø40 Ø50
n2* (r/min) 280 140 93 70 55 47 34 27 24 17 14 13 12 8 7
M2(Nm) 50hz 48.2 97.5 145.7 193.9 242.1 272 351 439 527 703 724 878 1060 1230 1230
60hz 40.2 81.3 121.4 161.6 201.8 226 293 366 439 585 603 732 878 1170 1230
Fr1(N) 1760 2450 2840 3230 3820 5100 5880 7060 7060 7060 7060 9800 9800 9800 9800
Fr2(N) 343
norminal ratio 5 10 15 20 25 30 40 50 60 80 100        
2.2kw output shaft  Ø40 Ø50  
n2* (r/min) 272 136 95 68 54 45 36 28 24 18 14        
M2(Nm) 50hz 67 133 200 266 332 399 515 644 773 1029 1230        
60hz 56 111 167 221 277 332 429 537 644 858 1080        
Fr1(N) 2160 3140 3530 4020 4700 6960 7250 8620 9800 9800 9800        
Fr2(N) 392

###

G3FM: THREE PHASE GEAR MOTOR WITH FLANGE                                                                                       (n1=1400r/min)
Power kw output shaft ratio A F I J M O O1 P Q R S T U W X Y Y1
standard brake
0.1kw  Ø18 5-10-15-20-25-30-40-50 236 270 192.5 11 16.5 170 4 10 30 145 35 18 20.5 129 6 157 80 81
 Ø22 60-80-100-120-160-200 262 296 197.5 11 19 185 4 12 40 148 47 22 24.5 129 6 171.5 89.5 83.5
0.2kw  Ø18 5-10-15-20-25 267 270 192.5 11 16.5 170 4 10 30 145 35 18 20.5 129 6 161 80 81
 Ø22 30-40-50-60-80-100 293 296 197.5 11 19 185 4 12 40 148 47 22 24.5 129 6 171.5 89.5 83.5
 Ø28 100-120-160-200 306 309.5 208.5 11 23.5 215 4 15 45 170 50 28 31 129 8 198.5 105.5 88
0.4kw  Ø22 5-10-15-20-25 314 324.5 204 11 19 185 4 12 40 148 47 22 24.5 139 6 171.5 89.5 88.5
 Ø28 30-40-50-60-80-100 330 337.5 215 11 23.5 215 4 15 45 170 50 28 31 139 8 198.5 105.5 93
 Ø32 100-120-160-200 349 357 229.5 13 28.5 250 4 15 55 180 60 32 35 139 10 234 126 98
0.75kw  Ø28 5-10-15-20-25 350.5 343.5 227.5 11 23.5 215 4 15 45 170 50 28 31 159 8 198.5 105.5 103
 Ø32 30-40-50-60-80-100 379.5 387 242 13 28.5 250 4 15 55 180 60 32 35 159 10 234 126 108
 Ø40 100-120-160-200 401.5 408.5 270 18 34 310 5 18 65 230 71 40 43 185 12 284 149 126.5
1.5kw  Ø32 5-10-15-20-25 420.5 441 254 13 28.5 250 5 15 55 180 60 32 35 185 10 234 126 121
 Ø40 30-40-50-60-80-100 457.5 478 270 18 34 310 5 18 65 230 71 40 43 185 12 284 149 126.5
 Ø50 100-120-160-200 485.5 506 300 22 40 360 5 25 75 270 83 50 53.5 185 14 325 173.5 132.5
2.2kw  Ø40 5-10-15-20-25 466.5 487 270 18 34 310 5 18 65 230 71 40 43 185 12 284 149 126.5
 Ø50 30-40-50-60-80-100 510.5 531 300 22 40 360 5 25 75 270 83 50 53.5 185 14 325 173.5 132.5

###

G3LM: THREE PHASE GEAR MOTOR WITH FOOT                                                                                                               (n1=1400r/min)
Power kw output shaft ratio A D E F J G H K P S T   U  V W   X  Y   Y1       
standard brake
0.1kw  Ø18 5-10-15-20-25-30-40-50 236 270 40 110 135 16.5 65 9 45 30 18 20.5 129 183 6 133 85 10
 Ø22 60-80-100-120-160-200 262 296 65 130 155 19 90 11 55 40 22 24.5 129 193 6 139.5 90 12
0.2kw  Ø18 5-10-15-20-25 267 270 40 110 135 16.5 65 9 45 30 18 20.5 129 183 6 133 85 10
 Ø22 30-40-50-60-80-100 293 296 65 130 155 19 90 11 55 40 22 24.5 129 193 6 139.5 90 12
 Ø28 100-120-160-200 306 309.5 90 140 175 23.5 125 11 65 45 28 31 129 203 8 170 110 15
0.4kw  Ø22 5-10-15-20-25 314 324.5 65 130 155 19 90 11 55 40 22 24.5 139 199.5 6 141.5 90 12
 Ø28 30-40-50-60-80-100 330 337.5 90 140 175 23.5 125 11 65 45 28 31 139 210 8 170 110 15
 Ø32 100-120-160-200 349 357 130 170 208 28.5 170 13 70 55 32 35 139 226 10 198 130 18
0.75kw  Ø28 5-10-15-20-25 350.5 343.5 90 140 175 23.5 125 11 65 45 28 31 159 222 8 170 110 15
 Ø32 30-40-50-60-80-100 379.5 387 130 170 208 28.5 170 13 70 55 32 35 159 238.5 10 198 130 18
 Ø40 100-120-160-200 401.5 408.5 150 210 254 34 196 15 90 65 40 43 185 249 12 230 150 20
1.5kw  Ø32 5-10-15-20-25 420.5 441 130 170 208 28.5 170 13 70 55 32 35 185 250.5 10 198 130 18
 Ø40 30-40-50-60-80-100 457.5 478 150 210 254 34 196 15 90 65 40 43 185 260 12 230 150 20
 Ø50 100-120-160-200 485.5 506 160 230 290 40 210 18 100 75 50 53.5 185 288 14 265 170 25
2.2kw  Ø40 5-10-15-20-25 466.5 487 150 210 254 34 196 15 90 65 40 43 185 260 12 230 150 20
 Ø50 30-40-50-60-80-100 510.5 531 160 230 290 40 210 18 100 75 50 53.5 185 288 14 265 170 25

###

G3FS: IEC GEAR REDUCER WITH FOOT                                                                                                                           (n1=1400r/min)
Power kw output shaft ratio A B C F I J L M N O O1 P Q R S S1 T T1 W W1 X Y Y1
0.12kw  Ø18 5-10-15-20-25-30-40-50 147 95 115 154 11 16.5 4.5 170 140 4 10 30 145 35 18 11 20.5 12.8 6 4 163 80 86.5
 Ø22 60-80-100-120-160-200 173 95 115 164 11 19 4.5 185 140 4 12 40 148 47 22 11 24.5 12.8 6 4 171.5 89.5 89
0.18kw  Ø18 5-10-15-20-25 147 95 115 154 11 16.5 4.5 170 140 4 10 30 145 35 18 11 20.5 12.8 6 4 163 80 86.5
 Ø22 30-40-50-60-80-100 173 95 115 164 11 19 4.5 185 140 4 12 40 148 47 22 11 24.5 12.8 6 4 171.5 89.5 89
 Ø28 100-120-160-200 186.5 95 115 186 11 23.5 4.5 215 140 4 15 45 170 50 28 11 31 12.8 8 4 198.5 105.5 93.5
0.37kw  Ø22 5-10-15-20-25 181.5 110 130 164 11 19 4.5 185 160 4 12 40 148 47 22 14 24.5 16.3 6 5 201 89.5 99
 Ø28 30-40-50-60-80-100 198 110 130 186 11 23.5 4.5 215 160 4 15 45 170 50 28 14 31 16.3 8 5 198.5 105.5 103.5
 Ø32 100-120-160-200 216.5 110 130 215 13 28.5 4.5 250 160 4 15 55 180 60 32 14 35 16.3 10 5 234 126 108.5
0.75kw  Ø28 5-10-15-20-25 206.5 130 165 185 11 23.5 4.5 215 200 4 15 45 170 50 28 19 31 21.8 8 6 216.5 105.5 123.5
 Ø32 30-40-50-60-80-100 235 130 165 215 13 28.5 4.5 250 200 4 15 55 180 60 32 19 35 21.8 10 6 236.5 126 128.5
 Ø40 100-120-160-200 260.5 130 165 270 18 34 4.5 310 200 5 18 65 230 71 40 19 43 21.8 12 8 284 149 134
1.5kw  Ø32 5-10-15-20-25 252 130 165 215 13 28.5 4.5 250 200 5 15 55 180 60 32 24 35 27.3 10 8 236.5 126 128.5
 Ø40 30-40-50-60-80-100 293.5 130 165 270 18 34 4.5 310 200 5 18 65 230 71 40 24 43 27.3 12 8 284 149 134
 Ø50 100-120-160-200 321.5 130 165 300 22 40 4.5 360 200 5 25 75 270 83 50 24 53.5 27.3 14