DUMP TRAILER Energy UNIT

DUMP TRAILER Power UNIT-DOUBLE ACTING
Basic Description
This power unit includes a electrical power up power down circuit with load holding on each A & B ports. A strain compensatred flow management can be additional to circuit to regulate the decent speed of the cylinder.
Exclusive Notes
1. This power unit is of S3 duty cycle, i.e., non-continuous operation, 30 seconds on and 270 seconds off.
2. Clean every one of the hydraulic parts concerned in advance of set up of the electrical power unit.
3. Viscosity on the hydraulic oil shoud be 15~46 cst, which really should also be clean and totally free of impurities. N46 hydraulic oil is advisable.
four. The electrical power unit need to be mounted horizontally.
five. Check the oil degree within the tank soon after the preliminary running with the electrical power unit.
6. Oil shifting is needed after the initial a hundred operation hrs, afterwards when each and every 3000 hrs.

DUMP TRAILER Power UNIT- SINGLE ACTING
Common Description
This electrical power unit has a electrical power up gravity down circuit. Commence the motor to lengthen the cylinder and activate the solenoid valve to retract the circuit. Manual override to solenoid valve is often presented if expected. Also a pressure compen sated movement manage is usually added towards the circuit to control the descent pace with the cylinder.
Remark: Please consult our sales engineer for the distinct pump displacement, motor electrical power or tank capability.
Particular Notes
1. This electrical power unit is of S3 duty cycle, i.e., non-continuous operation, 30 seconds on and 270 seconds off.
2. Clean every one of the hydraulic elements concerned before set up of the electrical power unit.
three. Viscosity of the hydraulic oil shoud be 15~46 cst,which really should also be clean and no cost of impurities.N46 hydraulic oil is recommended.
4. The electrical power unit need to be mounted horizontally.
5. Check the oil degree in the tank just after the preliminary working in the energy unit.
6. Oil transforming is required after the original 100 operation hours, afterwards once every 3000 hrs.

Tags:

Recent Posts

Gearbox-worm

As one of leading gearbox worm manufacturers, suppliers and exporters of mechanical products, We offer gearbox worm and many other products.

Please contact us for details.

Mail: [email protected]

Manufacturer supplier exporter of gearbox worm.