Leaf Chain

Leaf chains consist of pins and plates only and are greater in power than roller chains. They are ideal for duties like hoisting and pulling. Leaf chains conform to ANSI and have two kinds: AL and BL.
AL form
For the use that static load is applied with tiny concern of sporting.
BL kind
For your use that wear resistance is needed given that affect load is utilized.
Choice of leaf chains
The chain size is chosen according towards the following formula:
Acting tension?¨¢Service factor¡§QMaximum allowable stress Notes:
1. Acting tension consists of the dead bodyweight on the chain, the weight in the attachments and inertia.
two. If your chain velocity exceeds thirty m/min, use a roller chain.
Minimum sheave diameter: S.D = Chain pitch?¨¢5
Minimal width concerning flanges: L = All round length of pin?¨¢1.05
?If connecting pins are presented: L¡§R2L1?¨¢1.05
F.D = S.D + Optimum link plate height (H) Note:?If dimension H exceeds 25.four,
F.D = S.D + 25.four could be adopted since the minimal flange outer diameter.
Periodical inspection and instructions for substitute
Be sure you perform periodical inspection and lubrication to verify security and prolong chain daily life. Issues and directions for remedy are outlined in the following.
Issue:Circumferential wear of plate
Resolution:Substitute the chain if dress in reduction becomes 5 percent of H.
Trouble:Oblique put on of plate and pin head
Resolution:Align the unit.
Problem:Abnormal protrusion or rotation of pin head
Resolution:Substitute the chain Lubricate and reduce overload.
Trouble:Put on elongation
Option:Change the chain when its length gets to be one.03L. Note: Dress in elongation of a
chain lowers its tensile power.
Wear elongation of 3% lowers the tensile power by 18 percent.
The put on life of chain might be enhanced by lubrication. Substitute the chain.
Trouble:Cracked plate (one)Crack: From the hole of the website link plate toward the end from the hyperlink plate during the direction perpendicular to tension direction.
Option:Substitute the chain with a chain of higher greatest allowable stress, or reduce the load or dynamic (shock) load.
Difficulty:Cracked plate (2)Crack: In an oblique course towards stress route.
Alternative:Substitute the chain, and guard from corrosive conditions.
Problem:Broken plate(by large stress)
Alternative:Substitute the chain, and do away with the lead to of overload.
Problem:Enlarged plate hole
Option:Change the chain, and get rid of the induce of overload.
Dilemma:Corrosion of pit
Solution:Exchange the chain, and guard from corrosive conditions.


Recent Posts


As one of leading gearbox worm manufacturers, suppliers and exporters of mechanical products, We offer gearbox worm and many other products.

Please contact us for details.

Mail: [email protected]

Manufacturer supplier exporter of gearbox worm.