The best way to connect O-ring Chains Remarks to connect common O-ring Chains

one.A connecting hyperlink of an O-ring Chain for general application is pre-coated with grease on the pins. Prior to connection, confirm the grease over the surfaces of pins, and if your amount of grease is compact, apply grease with bare hands. (If gloves are applied, the grease are going to be absorbed by the gloves.)
Illustration: Once the connecting hyperlink (I) of an O-ring chain for basic application is
shipped, O-rings are fitted at the roots from the pins. In case the O-rings come loose due to vibration in the course of transport, refit the O-rings in to the roots in the pins.
In this instance, be sure to return the grease collected with the roots with the pins on the central surfaces of the pins, extra at portion A than at portions B shown in the above illustration. (Portions A is worn as a result of sliding using the bushings.)
two.The chain is usually most conveniently connected within the teeth of the sprocket. Engage the back links at each ends from the chain using the sprocket teeth and fit connecting pins. When the sprocket might be moved, the chain may also be linked around the loosened side.
3. Connecting procedure
1.Confirm that O-rings are connected on the roots of your pins.
2.Should the level of grease utilized on the connecting pins is small, coat the pins with grease with the central portions.
3.Insert the connecting pins into the bushings on the inner hyperlinks at both ends.
four.Confirm that the grease is applied towards the whole face of the O-ring, and match the O-ring onto the connecting pins.
five.Insert the connecting pins into the connecting plate and even though pressing the connecting plate, set up the spring clip. Confirm no matter if the head (the end with no split) of your spring clip is turned inside the feeding direction of the chain. (See the next illustration.)
6.Make sure to verify that the spring clip is securely fitted while in the clip grooves with the connecting pins.
This completes jointing on the connecting website link. Note that grease over the surfaces of connecting pins and O-rings may be eliminated through set up work. In this instance, re-grease employing the grease to the surface from the base chain or even the grease during the polyethylene bag through which the connecting hyperlink was contained.


Recent Posts


As one of leading gearbox worm manufacturers, suppliers and exporters of mechanical products, We offer gearbox worm and many other products.

Please contact us for details.

Mail: [email protected]

Manufacturer supplier exporter of gearbox worm.